Hoch

SIPSorcery vulnerable to Denial of Service via out-of-bounds read in SCTP SACK chunk parsing

  • Veröffentlicht: 12.08.2026
  • Aktualisiert: 11.10.2026 11:23

Summary

SctpSackChunk.ParseChunk reads the numGapAckBlocks and numDuplicateTSNs fields (each up to 65535) directly from an attacker-controlled SCTP SACK chunk and loops that many times reading 4 bytes per iteration, with no validation of the counts against the chunk length or the receive buffer. A single crafted SACK chunk from a negotiated WebRTC peer forces reads past the end of the 262144-byte receive buffer, raising IndexOutOfRangeException, which is not caught by the recoverable handler and terminates the dedicated SCTP receive thread — permanently killing the SCTP association and all data channels.

Root Cause

src/SIPSorcery/net/SCTP/Chunks/SctpSackChunk.cs:

  • ushort numGapAckBlocks = NetConvert.ParseUInt16(buffer, startPosn + 8); (:141)
  • ushort numDuplicateTSNs = NetConvert.ParseUInt16(buffer, startPosn + 10); (:142)
  • gap-ack loop (:146) and duplicate-TSN loop (:154) index the buffer via NetConvert.ParseUInt16/32 (buffer[posn], no bounds check — sys/Net/NetConvert.cs:30,41). SctpPacket.ParseChunks (SctpPacket.cs:195-203) only validates chunkLength >= 4 and posn+chunkLength <= length; the counts inside the value are never checked. RTCSctpTransport.DoReceive calls SctpPacket.Parse(recvBuffer, 0, bytesRead) on a reused recvBuffer = new byte[262144].

Impact

IndexOutOfRangeException is a SystemException, not ApplicationException, so the recoverable catch (ApplicationException) { … continue; } at RTCSctpTransport.cs:345 is skipped and control falls to the generic catch (Exception) { … break; } at :356. The break exits the receive loop, DoReceive returns, and the dedicated _receiveThread = new Thread(DoReceive) (:173, started once) exits with no restart → the SCTP association and every data channel are permanently dead (denial of service).

Proof of Concept

A negotiated WebRTC peer (post-DTLS) sends a checksum-valid SCTP packet: 12-byte common header + a SACK chunk (type 3) with chunkLength=16, numGapAckBlocks=0xFFFF, numDuplicateTSNs=0xFFFF. CRC32C is attacker-computable. The gap-ack loop reaches buffer[262144] on a 262144-byte array (valid indices 0..262143) → IndexOutOfRangeException.

Attack Chain

  1. Entry: post-DTLS negotiated peer sends a checksum-valid SCTP packet with a SACK chunk (chunkLength=16, numGapAckBlocks=0xFFFF). Guard: VerifyChecksum (CRC32C). Bypass: CRC32C is computable by the sender.
  2. Processing: DoReceive (RTCSctpTransport.cs:286) reads into reused recvBuffer (262144 bytes, :280) → SctpPacket.Parse(recvBuffer, 0, bytesRead) (:302) → ParseChunks → SACK dispatch (SctpChunk.Parse :340-341) → SctpSackChunk.ParseChunk. Guard: ParseChunks checks only chunkLength>=4 and posn+chunkLength<=length (SctpPacket.cs:195-203). Bypass: chunkLength=16 is well-formed; the counts are never validated.
  3. Sink: gap-ack loop (SctpSackChunk.cs:146) calls NetConvert.ParseUInt16(buffer, reportPosn) with reportPosn starting at startPosn(16)+FIXED_PARAMETERS(12)=28, climbing +4 each iteration. Guard: none on the count. Bypass: NetConvert.ParseUInt16 (NetConvert.cs:30) indexes buffer[posn] unchecked.
  4. Impact: at iteration 65529, reportPosn = 28 + 65529*4 = 262144 → buffer[262144] → IndexOutOfRangeException → generic catch at RTCSctpTransport.cs:356 → break → receive thread exits, no restart → association permanently dead.

Bypass Evidence

  • Unchecked counts at SctpSackChunk.cs:141-142; loops at :146,:154.
  • NetConvert.ParseUInt16 unchecked indexing (NetConvert.cs:30).
  • ParseChunks validates only chunkLength (SctpPacket.cs:195-203).
  • OOB math: 28 + 65535*4 = 262168 > 262144; buffer is 262144 (DEFAULT_ADVERTISED_RECEIVE_WINDOW, SctpAssociation.cs:62). numGapAckBlocks alone suffices — the dup-TSN loop is not needed.
  • DoReceive catch split: recoverable catch(ApplicationException) at :345 (continue) vs generic catch(Exception) at :356 (break); _receiveThread started once at :176.

Affected Versions

nuget:SIPSorcery <= 10.0.13 (verified present on release tag v10.0.13 and HEAD da944543).

Dedup

NOT a duplicate of GHSA-qmvg-569h-hqrh — that fix (fe5a1fa) touched only SctpPacket.cs (the chunk-cursor zero-length infinite loop, CWE-835). This is a distinct out-of-bounds read (CWE-125) in SctpSackChunk count loops, untouched by that fix.

Suggested Fix

Validate startPosn + FIXED_PARAMETERS_LENGTH + numGapAckBlocks*4 + numDuplicateTSNs*4 <= posn + chunkLen before the loops, and/or make NetConvert.Parse* bounds-checked, and/or treat IndexOutOfRangeException/ArgumentException as recoverable in DoReceive.


Reported by zx (Jace) — GitHub: @manus-use

Betroffene Software

Klicken Sie auf eine Technologie, um alle zugehörigen Schwachstellen anzuzeigen.

PlattformPaketAnfällige VersionenBehoben in
.NET (NuGet) SIPSorcery < 10.0.14 10.0.14

Verweise

CVSS-Wert 7.5/10
CVSS-Vektor
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H
Schwäche (CWE)
CWE-125, CWE-755
Plattform
.NET (NuGet)
Paket
SIPSorcery
Veröffentlicht
12.08.2026
Aktualisiert
11.10.2026 11:23

Quellen und Lizenzen

OSV / GitHub Advisory Database - GHSA-jwjp-4649-v8jp - CC BY 4.0

Schwachstellenhistorie: SIPSorcery

Alle veröffentlichten Schwachstellen dieses Pakets (.NET (NuGet)), neueste zuerst. Zeigt, ob es ein einmaliger Ausrutscher ist oder ein Paket, das man im Auge behalten muss.

Einträge insgesamt
3
Erste → letzte
07.2026 08.2026
Ohne Fix
0
In Angriffen ausgenutzt
0

Verteilung nach Schweregrad

  • Hoch 3

Veröffentlichungen pro Jahr

  1. 2026: 3
  1. SIPSorcery vulnerable to Denial of Service via out-of-bounds read in SCTP SACK chunk parsing dieser Eintrag
    Hoch · 7.5 ghsa-jwjp-4649-v8jp < 10.0.14 10.0.14

Erkennen Sie Schwachstellen in Ihrer Anwendung

Mit der DockRay-Integration und aktivierter Softwareinventarisierung prüft DockRay gemeldete Komponentenversionen auf bekannte Schwachstellen und benachrichtigt Sie über bestätigte Treffer. Die Abdeckung hängt von der unterstützten Technologie und den verfügbaren Meldungen ab.

Anwendung verbinden
DockRay Newsletter

Anwendungssicherheit in Ihrem Postfach

Wichtige Schwachstellen, konkrete Empfehlungen und praktische Tipps für Ihre Anwendungen. Wählen Sie Ihre Technologien und verfolgen Sie, was für Ihr Projekt relevant ist.

  • Eine tägliche Zusammenfassung neuer Schwachstellen, auch kritischer.
  • Benachrichtigungen über wichtige Updates.
  • Praktische Tipps zur Sicherheit und Überwachung von Anwendungen.

Leer lassen, um Meldungen zu allen Technologien zu erhalten.

Kostenlos anmelden. In jeder E-Mail mit einem Klick abmelden.