Pillow: Out-of-bounds read via attacker-controlled row stride on Pillow's mmap path (McIdas AREA files)

Summary

When Pillow loads an uncompressed image whose tile uses the raw codec and a mode in Image._MAPMODES, and the image was opened from a filename, it memory-maps the file and builds the image's row pointers directly into the mapping via PyImaging_MapBuffer (src/map.c). The per-row spacing (stride) is taken from the tile arguments. map.c validates offset + ysize*stride <= buffer_len but never checks that stride is at least the natural row width xsize * pixelsize.

The McIdas AREA plugin (McIdasImagePlugin.py) derives stride, offset, xsize, and ysize directly from attacker-controlled 32-bit header words with no validation. By supplying a stride far smaller than the row width, an attacker makes each row pointer read xsize*pixelsize bytes that run past the mapped region. Accessing the pixels (e.g. Image.tobytes(), getpixel, convert, save) then reads adjacent process memory (information disclosure) or faults (SIGBUS, denial of service).

Complete Code Trace

Step 1: McIdasImageFile._open - turns attacker header words into image size, file offset, and row stride with no validation.

# src/PIL/McIdasImagePlugin.py:41-70
s = self.fp.read(256)
if not _accept(s) or len(s) != 256:        # _accept: prefix == b"\x00\x00\x00\x00\x00\x00\x00\x04"
    raise SyntaxError(...)
self.area_descriptor = w = [0, *struct.unpack("!64i", s)]   # w[1..64] = signed BE int32, ALL attacker-controlled

if w[11] == 1:
    mode = rawmode = "L"                    # pixelsize 1, in _MAPMODES
elif w[11] == 2:
    mode = rawmode = "I;16B"                # pixelsize 2, in _MAPMODES
...
self._mode = mode
self._size = w[10], w[9]                    # (xsize, ysize)  <-- attacker
offset = w[34] + w[15]                       # <-- attacker
stride = w[15] + w[10] * w[11] * w[14]       # <-- attacker (set w[14]=0, w[15]=1 => stride=1)
self.tile = [
    ImageFile._Tile("raw", (0, 0) + self.size, offset, (rawmode, stride, 1))
]

Step 2: ImageFile.load (mmap branch) - selects mmap and delegates to map_buffer.

# src/PIL/ImageFile.py:322-348
if use_mmap:                                 # use_mmap = self.filename and len(self.tile) == 1
    decoder_name, extents, offset, args = self.tile[0]
    if (decoder_name == "raw" and isinstance(args, tuple) and len(args) >= 3
            and args[0] == self.mode and args[0] in Image._MAPMODES):
        if offset < 0:                       # only lower-bound guard on offset
            raise ValueError("Tile offset cannot be negative")
        with open(self.filename) as fp:
            self.map = mmap.mmap(fp.fileno(), 0, access=mmap.ACCESS_READ)
        if offset + self.size[1] * args[1] > self.map.size():   # == offset + ysize*stride; NO stride>=linesize check
            raise OSError("buffer is not large enough")
        self.im = Image.core.map_buffer(
            self.map, self.size, decoder_name, offset, args      # args = ("L", stride, 1)
        )

Step 3: PyImaging_MapBuffer - builds row pointers at stride spacing into the mmap; validates everything except stride >= row width.

/* src/map.c:65-140 */
if (!PyArg_ParseTuple(args, "O(ii)sn(sii)",
        &target, &xsize, &ysize, &codec, &offset, &mode_name, &stride, &ystep))
    return NULL;
...
const ModeID mode = findModeID(mode_name);          /* "L" */

if (stride <= 0) {                                  /* attacker sets stride=1 (>0) -> NOT recomputed */
    if (mode == IMAGING_MODE_L || mode == IMAGING_MODE_P) stride = xsize;
    else if (isModeI16(mode)) stride = xsize * 2;
    else stride = xsize * 4;
}

if (stride > 0 && ysize > PY_SSIZE_T_MAX / stride) {/* overflow guard only */
    PyErr_SetString(PyExc_MemoryError, "Integer overflow in ysize"); return NULL;
}
size = (Py_ssize_t)ysize * stride;                  /* = 1*1 = 1 */

if (offset > PY_SSIZE_T_MAX - size) { ... }
...
if (offset + size > view.len) {                     /* 1 + 1 = 2 <= 256 -> PASSES */
    PyErr_SetString(PyExc_ValueError, "buffer is not large enough");
    PyBuffer_Release(&view); return NULL;
}

im = ImagingNewPrologueSubtype(mode, xsize, ysize, sizeof(ImagingBufferInstance));
/* im->linesize = xsize * pixelsize = 200000  (the REAL per-row read width) */

/* setup file pointers -- NO check that stride >= im->linesize */
if (ystep > 0) {
    for (y = 0; y < ysize; y++) {
        im->image[y] = (char *)view.buf + offset + y * stride;   /* row points into mmap, spacing=1 */
    }
} else { ... }

im->linesize (the number of bytes any consumer reads per row) is xsize * pixelsize = 200000, but the row pointers are only stride = 1 byte apart and the buffer is only offset + ysize*stride = 2 bytes "claimed". Nothing reconciles the two.

Step 4: pixel access (Image.tobytes() → raw encoder copy1) - reads linesize bytes from im->image[0], i.e. xsize bytes starting at view.buf + offset, running far past the mmap.

/* the raw "L" packer copies linesize (=xsize) bytes per row from im->image[y];
   for row 0 that is view.buf+1 .. view.buf+1+200000, vs a 256-byte file. */

Chain Summary

SOURCE: McIdas AREA header words w[9],w[10],w[11],w[14],w[15],w[34]  (Image.open on a path)
  ↓ McIdasImagePlugin._open: stride = w[15]+w[10]*w[11]*w[14]  -> attacker sets stride=1   [McIdasImagePlugin.py:66]
  ↓ tile = ("raw", (0,0,xsize,1), offset, ("L", 1, 1))                                     [McIdasImagePlugin.py:68]
GADGET: ImageFile.load mmap branch -- only checks offset+ysize*stride<=len  <- BUG: no stride>=linesize check  [ImageFile.py:343]
  ↓ core.map_buffer(map, (xsize,1), "raw", offset, ("L",1,1))                              [ImageFile.py:346]
SINK: PyImaging_MapBuffer: im->image[0] = view.buf + offset + 0*stride; linesize=xsize   [map.c:134]
  ↓ Image.tobytes() raw "L" encoder reads linesize (=xsize) bytes from im->image[0]
IMPACT: reads xsize bytes from a tiny mmap -> OOB read of adjacent process memory (leak) or SIGBUS (DoS)

Proof of Concept

See attached poc.zip

Impact on a Parent Application

Any application that opens image files supplied by users from a path on disk (the common pattern: save upload to a temp file, then Image.open(path)), has the default plugin set (McIdas is registered by default), and subsequently reads/returns/re-encodes the decoded pixels (thumbnailing, format conversion, serving a preview), is exposed:

• Information disclosure (High): the decoded "image" contains bytes of the worker process's adjacent heap/mapped memory, which the app then serves or stores - potentially leaking secrets, credentials, or other users' data.
• Denial of service (High): a larger xsize reliably crashes the worker with SIGBUS.

Suggested fix

Core fix in src/map.c (PyImaging_MapBuffer): reject offset < 0 and stride < im->linesize. Defense-in-depth in McIdasImagePlugin._open: reject offset < 0 or stride < xsize*pixelsize .